aliyundrive-webdav

 

>

>

Help me to become a full-time open-source developer by sponsoring me on GitHub

阿里云盘 WebDAV 服务，主要使用场景为配合支持 WebDAV 协议的客户端 App 如 Infuse、nPlayer 等实现在电视上直接观看云盘视频内容， 支持客户端 App 直接从阿里云盘获取文件播放而不经过运行本应用的服务器中转, 支持上传文件，但受限于 WebDAV 协议不支持文件秒传。

请注意：V2 版本基于阿里云盘开放平台接口实现，不再支持阿里云盘 Web 和 App 版本获取的 refresh token。 由于本项目作者不再使用梅林固件，V2 版本不再免费支持 Koolshare 梅林固件系统，如有需要请考虑付费支持。

如果项目对你有帮助，请考虑捐赠支持项目持续维护。 也可以考虑加入aliyundrive-webdav 知识星球获取咨询和技术支持服务。

Note

本项目作者没有上传需求, 故上传文件功能测试不全面且没有持续迭代计划.

安装

 

可以从 GitHub Releases 页面下载预先构建的二进制包， 也可以使用 pip 从 PyPI 下载:

pip install aliyundrive-webdav

如果系统支持 Snapcraft 比如 Ubuntu、Debian 等，也可以使用 snap 安装：

sudo snap install aliyundrive-webdav

OpenWrt 路由器

 

GitHub Releases 中有预编译的 ipk 文件， 目前提供了 aarch64/arm/mipsel/x86_64/i686 等架构的版本，可以下载后使用 opkg 安装，以 nanopi r4s 为例：

wget https://github.com/messense/aliyundrive-webdav/releases/download/v2.3.3/aliyundrive-webdav_2.3.3-1_aarch64_generic.ipk
wget https://github.com/messense/aliyundrive-webdav/releases/download/v2.3.3/luci-app-aliyundrive-webdav_2.3.3_all.ipk
wget https://github.com/messense/aliyundrive-webdav/releases/download/v2.3.3/luci-i18n-aliyundrive-webdav-zh-cn_2.3.3-1_all.ipk
opkg install aliyundrive-webdav_2.3.3-1_aarch64_generic.ipk
opkg install luci-app-aliyundrive-webdav_2.3.3_all.ipk
opkg install luci-i18n-aliyundrive-webdav-zh-cn_2.3.3-1_all.ipk

其它 CPU 架构的路由器可在 GitHub Releases 页面中查找对应的架构的主程序 ipk 文件下载安装， 常见 OpenWrt 路由器 CPU 架构如下表（欢迎补充）：

路由器	CPU 架构
nanopi r4s	aarch64_generic
小米 AX3600	aarch64_cortex-a53
斐讯 N1 盒子	aarch64_cortex-a53
Newifi D2	mipsel_24kc
Pogoplug	arm_mpcore

Tips: 不清楚 CPU 架构类型可通过运行 opkg print-architecture 命令查询。

target=”_blank” rel=”noreferrer noopener”>

Docker 运行

 

docker run -d --name=aliyundrive-webdav --restart=unless-stopped -p 8080:8080 \
  -v /etc/aliyundrive-webdav/:/etc/aliyundrive-webdav/ \
  -e REFRESH_TOKEN='your refresh token' \
  -e WEBDAV_AUTH_USER=admin \
  -e WEBDAV_AUTH_PASSWORD=admin \
  messense/aliyundrive-webdav

其中，REFRESH_TOKEN 环境变量为你的阿里云盘 refresh_token，WEBDAV_AUTH_USER 和 WEBDAV_AUTH_PASSWORD 为连接 WebDAV 服务的用户名和密码。

QNAP 威联通 NAS

 

QNAP 插件

 

qnap-aliyunpan-webdav by @iranee.

ContainerStation (Docker)

 

管理员登陆 NAS 后安装 ContainerStation 并启动服务，在 Management (管理) 标签中 Create Application (新建应用)，配置如下

version: '3.3'
services:
  aliyundrive-webdav:
    container_name: aliyundrive-webdav
    restart: unless-stopped
    ports:
      - '8080:8080'
    environment:
      - 'REFRESH_TOKEN=mytoken...'
    image: messense/aliyundrive-webdav

其中 REFRESH_TOKEN 文档最下面说明；:8080 网盘访问映射端口，可以按需改为其他的。

点击 Create (创建)后启动，访问 http://nas地址:8080/ 即可看到你网盘的自动生成索引网页文件。

参考文档

• https://docs.docker.com/compose/
• https://www.composerize.com/

rclone

 

为了避免重复上传文件，使用 rclone 时推荐使用 Nextcloud WebDAV 模式，可以支持 sha1 checksums. 另外需要配合 --no-update-modtime 参数，否则 rclone 为了更新文件修改时间还是会强制重新上传。

举个例子：

rclone --no-update-modtime copy abc.pdf aliyundrive-nc://docs/

获取 refresh token

 

• 通过在线工具获取 refresh token
• 命令行运行 aliyundrive-webdav qr login 扫码授权后会输出 refresh token

target=”_blank” rel=”noreferrer noopener”>

命令行用法

 

$ aliyundrive-webdav --help
WebDAV server for AliyunDrive

Usage: aliyundrive-webdav [OPTIONS]
       aliyundrive-webdav 

Commands:
  qr    Scan QRCode
  help  Print this message or the help of the given subcommand(s)

Options:
      --host 
          Listen host

          

[env: HOST=]

[default: 0.0.0.0]

-p, –port Listen port

[env: PORT=]

[default: 8080]

–client-id Aliyun drive client_id

[env: CLIENT_ID=]

–client-secret Aliyun drive client_secret

[env: CLIENT_SECRET=]

–drive-type Aliyun drive type

[env: DRIVE_TYPE=]

Possible values: – resource: Resource drive – backup: Backup drive – default: Default drive -r, –refresh-token Aliyun drive refresh token

[env: REFRESH_TOKEN=]

-U, –auth-user WebDAV authentication username

[env: WEBDAV_AUTH_USER=]

-W, –auth-password WebDAV authentication password

[env: WEBDAV_AUTH_PASSWORD=]

-I, –auto-index Automatically generate index.html -S, –read-buffer-size Read/download buffer size in bytes, defaults to 10MB

[default: 10485760]

–upload-buffer-size Upload buffer size in bytes, defaults to 16MB

[default: 16777216]

–cache-size Directory entries cache size

[default: 1000]

–cache-ttl Directory entries cache expiration time in seconds

[default: 600]

–root Root directory path

[env: WEBDAV_ROOT=]

[default: /]

-w, –workdir Working directory, refresh_token will be stored in there if specified –no-trash Delete file permanently instead of trashing it –read-only Enable read only mode –tls-cert TLS certificate file path

[env: TLS_CERT=]

–tls-key TLS private key file path

[env: TLS_KEY=]

–strip-prefix Prefix to be stripped off when handling request

[env: WEBDAV_STRIP_PREFIX=]

–debug Enable debug log –no-self-upgrade Disable self auto upgrade –skip-upload-same-size Skip uploading same size file –prefer-http-download Prefer downloading using HTTP protocol –redirect Enable 302 redirect when possible -h, –help Print help (see a summary with ‘-h’) -V, –version Print version

[env: HOST=]

[default: 0.0.0.0]

-p, –port Listen port

[env: PORT=]

[default: 8080]

–client-id Aliyun drive client_id

[env: CLIENT_ID=]

–client-secret Aliyun drive client_secret

[env: CLIENT_SECRET=]

–drive-type Aliyun drive type

[env: DRIVE_TYPE=]

Possible values: – resource: Resource drive – backup: Backup drive – default: Default drive -r, –refresh-token Aliyun drive refresh token

[env: REFRESH_TOKEN=]

-U, –auth-user WebDAV authentication username

[env: WEBDAV_AUTH_USER=]

-W, –auth-password WebDAV authentication password

[env: WEBDAV_AUTH_PASSWORD=]

-I, –auto-index Automatically generate index.html -S, –read-buffer-size Read/download buffer size in bytes, defaults to 10MB

[default: 10485760]

–upload-buffer-size Upload buffer size in bytes, defaults to 16MB

[default: 16777216]

–cache-size Directory entries cache size

[default: 1000]

–cache-ttl Directory entries cache expiration time in seconds

[default: 600]

–root Root directory path

[env: WEBDAV_ROOT=]

[default: /]

-w, –workdir Working directory, refresh_token will be stored in there if specified –no-trash Delete file permanently instead of trashing it –read-only Enable read only mode –tls-cert TLS certificate file path

[env: TLS_CERT=]

–tls-key TLS private key file path

[env: TLS_KEY=]

–strip-prefix Prefix to be stripped off when handling request

[env: WEBDAV_STRIP_PREFIX=]

–debug Enable debug log –no-self-upgrade Disable self auto upgrade –skip-upload-same-size Skip uploading same size file –prefer-http-download Prefer downloading using HTTP protocol –redirect Enable 302 redirect when possible -h, –help Print help (see a summary with ‘-h’) -V, –version Print version” tabindex=”0″ role=”button” style=”box-sizing: border-box; position: relative; display: flex !important; padding: 0px !important; font-size: 14px; font-weight: var(–base-text-weight-medium, 500); line-height: 20px; white-space: nowrap; vertical-align: middle; cursor: pointer; user-select: none; border: 0px; border-radius: 6px; appearance: none; color: var(–fgColor-accent, var(–color-accent-fg)); background-color: transparent; box-shadow: none; transition: color 80ms cubic-bezier(0.33, 1, 0.68, 1) 0s, background-color, box-shadow, border-color; justify-content: center !important; align-items: center !important; margin: var(–base-size-8, 8px) !important; width: var(–control-small-size, 28px); height: var(–control-small-size, 28px);”>

Note

注意：TLS/HTTPS 暂不支持 MIPS 架构。

Note

注意：启用 --skip-upload-same-size 选项虽然能加速上传但可能会导致修改过的同样大小的文件不会被上传

License

 

This work is released under the MIT license. A copy of the license is provided in the LICENSE file.